0.93M Telescopic Extension for the .93m - 1.55m Pole
With the practical extension piece, our telescopic stems can be extended indefinitely. So, no window remains unreachable. Used only for Vario Window Cleaners
Product Description:
» Feather light with maximum robustness: made of non-slip, solid aluminum
» With several extensions, the Ha-Ra telescopic stems can be extended almost arbitrarily
» 100% Made in Germany: all stems are made by hand in our Saarland manufactory
Tips and Application:
1. To expand the telescopic handle, remove the plastic handle (if necessary with
heat a hair dryer to make it easier to peel off).
2. Turn the screw protruding from the telescopic handle extension into the screw thread of the telescopic handle until both parts are firmly and flush with each other.
3. If necessary, expand in the same way with further extension parts. As soon as the desired length is reached, put the plastic handle back on the end.
4. To adjust the telescopic handle to the exact length, open the clamp piece, pull out the inner tube as desired and fix it by closing the clamp piece.
5. To connect the telescopic handle to the window wiper, attach the telescopic handle to the handle of the Ha-Ra window wiper with a little pressure and a slight rotation.
6. Loosen the wing screw on the connector and adjust the angle of the Ha-Ra telescopic handle required for foaming. Then close the wing screw tightly again.
7. To pull off, rotate the angle by 180° (window wiper standard) or Turn the rubber lip upwards and reattach the plastic handle (window wiper Vario).
With the practical extension piece, our telescopic stems can be extended indefinitely. So, no window remains unreachable. Used only for Vario Window Cleaners
Product Description:
» Feather light with maximum robustness: made of non-slip, solid aluminum
» With several extensions, the Ha-Ra telescopic stems can be extended almost arbitrarily
» 100% Made in Germany: all stems are made by hand in our Saarland manufactory
Tips and Application:
1. To expand the telescopic handle, remove the plastic handle (if necessary with
heat a hair dryer to make it easier to peel off).
2. Turn the screw protruding from the telescopic handle extension into the screw thread of the telescopic handle until both parts are firmly and flush with each other.
3. If necessary, expand in the same way with further extension parts. As soon as the desired length is reached, put the plastic handle back on the end.
4. To adjust the telescopic handle to the exact length, open the clamp piece, pull out the inner tube as desired and fix it by closing the clamp piece.
5. To connect the telescopic handle to the window wiper, attach the telescopic handle to the handle of the Ha-Ra window wiper with a little pressure and a slight rotation.
6. Loosen the wing screw on the connector and adjust the angle of the Ha-Ra telescopic handle required for foaming. Then close the wing screw tightly again.
7. To pull off, rotate the angle by 180° (window wiper standard) or Turn the rubber lip upwards and reattach the plastic handle (window wiper Vario).
With the practical extension piece, our telescopic stems can be extended indefinitely. So, no window remains unreachable. Used only for Vario Window Cleaners
Product Description:
» Feather light with maximum robustness: made of non-slip, solid aluminum
» With several extensions, the Ha-Ra telescopic stems can be extended almost arbitrarily
» 100% Made in Germany: all stems are made by hand in our Saarland manufactory
Tips and Application:
1. To expand the telescopic handle, remove the plastic handle (if necessary with
heat a hair dryer to make it easier to peel off).
2. Turn the screw protruding from the telescopic handle extension into the screw thread of the telescopic handle until both parts are firmly and flush with each other.
3. If necessary, expand in the same way with further extension parts. As soon as the desired length is reached, put the plastic handle back on the end.
4. To adjust the telescopic handle to the exact length, open the clamp piece, pull out the inner tube as desired and fix it by closing the clamp piece.
5. To connect the telescopic handle to the window wiper, attach the telescopic handle to the handle of the Ha-Ra window wiper with a little pressure and a slight rotation.
6. Loosen the wing screw on the connector and adjust the angle of the Ha-Ra telescopic handle required for foaming. Then close the wing screw tightly again.
7. To pull off, rotate the angle by 180° (window wiper standard) or Turn the rubber lip upwards and reattach the plastic handle (window wiper Vario).
